Our NEW RM6000 comes completely galvanized so it won’t rust. Has solid tread plate floor with solid sides, so animals enter more easily with less distraction toward our V-type manual head gate. TM6000 is good for horned or polled sheep and goats. The backside has a 12-inch strip of carpet with the help of a back support and head gate to keep animal in position. Unit can be connected to the end of your raceway. (note: Does not include butt gate – RSG24)Weight: 295 lb (134.1 kg)
ROLL O'MATIC WITH SCALE ATTACHMENT
Unit comes completely installed with 4 beam load cells, weigh indicator and indicator holder. Save time and money getting your animals weight fast and accurate while working them in your Roll table without the need of a separate scale.
Our RM6000S comes completely galvanized so it won’t rust. Has solid tread plate floor with solid sides, so animals enter more easily with less distractions toward our V-type manual headgate. RM6000 is good for horned or pulled sheep and goats. The backside has a 12 inch strip of carpet with the help of a back support and headgate to keep animal in position. Unit can be connected to the end of your raceway. (note: Does not include butt gate – RSG24)Weight: 315 lb (143.2 kg)
PAIR OF AUTOMATIC CLOSING DOORS
The SC2-3 pair of automatic closing door panels gives you easy access to the animal’s head. These panels allow you to add a sorter to the end of your RM6000 or just extend your raceway. The far-side door panel opens partially as the animal is rolled over to allow for the animal’s head and returns to closed position when the table is rolled back. Doors can also be locked in the open position.
Add a sorter to the end of your RM6000
(BS800 works best because of 30″ arm)ProductDescriptionPriceWeight(1)BS800Bi Sorter$325.0075 lbs(1)SC2-3Pair of Doors$310.0082 lbs(2)S38Linking Rod$13.006 lbsTOTAL$648.00163 lbsWeight: 82 lb (37.3 kg)
The electric lift and turn machine for sheep and goats. Equipment is hot dipped galvanized. Can’t trim your animal’s feet? Turn tables too hard to operate? Now there’s a solution: the TM5000 Turn O’Matic. To operate, the sheep or goat enters TM5000 chute and you squeeze them up tight and push the button. Unit lifts and turns animal on its side and automatically stops when complete. Next, you release the drop-away floor and trim their feet. When the job is done, you rotate the floor back in place, push the button, the unit rotates back down, and you release the animal. It’s just that easy!
Benefits of the TM5000
ProductWeightPriceTM5000310 lbs$1575.00TM5000-2G400 lbs$1895.00TW50 Optional Wheel Set37 lbs$95.00TG5 Optional Bolt On End Gate12 lbs$85.00Width: 60″ / Depth: 54″ / Height: 66″
- The TM5000 not only turns the animal on its side, but it also lifts the animal to a better working height of 42 inches.
- The TM5000 chute width is adjustable for different size animals.
- The TM5000 has a 12-inch strip of indoor/outdoor carpet fastened on the table back to reduce squirming and sliding.
- The TM5000 squeeze side of the chute has the same carpet as back to contour with the animal’s body and create friction to help the animal from squirming and sliding around. The animals rest very comfortably in this unit, making foot trimming easier.
- The TM5000 can be used on horned animals.
- The TM5000 cycle time is 7 seconds up or down.
- TM5000 is powered by a 110 4.5 amp 460 watt motor and has a 1-year warranty.
- TM5000 lift capacity is about 450 lbs.
END GATE FOR TM5000
These portable wheel assembles work on both the TM5000 and WS8000 work tables. TW50 has 10-inch solid wheels. When you install the handles and push down and lock them in, it raises the table 5 inches off the ground. These tables are well balanced so it’s a matter of pushing them, not lifting them.Weight: 37 lb (16.8 kg)
ELECTRIC LIFT WORK PLATFORM
Our WS8000 goes from ground level to 36 inches off the ground in 15 seconds. Unit comes with ground Rollin’ Stop Gate so it can be hooked into your raceway and has a bi-fold gate on work deck. Once the sheep or goat enters the platform, you pull the overhead bar and weigh them. Then you open the head gate enough to entice them in and lock them up. The platform has double access doors, so you can work on them at whatever height you like. When done, you can realease them either straight through the head gate or out the side doors. Lift motor comes with a 1-year warranty. WS8000 comes with D400 Dial.ProductWeightPriceWS8000390 lbs
$1795.00Now $1595.00TW50 Optional Wheel Set37 lbs$95.00Length: 58″ / Width: 54″ / Height: 7′ – 10′
Pen size: 6 ft (72 inches) square by 42 inches high
As shown in picture (can be purchased in parts):Prod.Desc.TotalWeightSH01Front Panel with Auto-Closing Door$275.0064 lbsSH02Stacker Panel for Hanging Shaft Machine Motor$70.0021 lbsSH03(2)Side Panels – 6′$250.0094 lbsSH04Back Access Panel with 3′ Door$165.0057 lbsSH05(2)3′ by 6′ Floor Sections$400.00142 lbsS38(4)Linking Rods$26.0012 lbsTOTAL$1,186.00390 lbs
Add an Automatic HEADGATE to Your System
(NOTE: Some door latches have changed)