V-STYLE MANUAL HEADGATE
This headgate is built tough and is reversible to operate from either side. The headgate adjusts at the bottom from 5 to 12 inches and the top opens to 30 inches. The unit easily bolts onto any of our 3 chutes and can also be bolted onto wood posts for those who want to make their own chute.Width: 55″ / Height: 86″ / Weight: 190 lb (86.4 kg)
HIGH RISE KIT
LP41, LP51, LP61
4', 5', 6' LAMBING AND KIDDING PANELS
These panels are lightweight yet very strong. Can form pens in various sizes from 4×4 pens to 6×6 pens. Panels have double hole connectors for use with 7/16-inch rods (R36), so setting pens back to back or against the wall is no problem. Now made heavier.
All panels are 41 inches high.ProductSizeWeightPriceLP414′25 lbs$59.00LP515′30 lbs$69.00LP616′33 lbs$79.00Height: 41″
8' PORTABLE LOADING RAMP
Our portable loading ramp has 10-inch wheels and is well balanced to push from either end. Ramp has 5 set height adjustments: 2, 2 ½, 3, 3 ½, and 4 feet. Ramp sides are angled. Bottom is 12 inches wide so animals can’t turn around. Top of ramp has side panel adjusters to adjust for different loading heights. This is a lot of ramp for the money!Weight: 175 lb (79.5 kg)
Our lowest price chute can also be converted into a grooming chute with a GB 1-2 attachment. Good for grooming the crazy ones. This is much stronger than your typical grooming chute. The chute is constructed of 2 inch by 14 gauge steel tubing. The side and back door are made of 1 ½ inch square tubing and are solid up 32 inches. Doors have a heavy ¾ inch solid steel spring loaded latch pin on the top and bottom. Rear door can be mounted at 2 different heights. There is a 6 inch opening in the front and side doors for easy access to the animal’s neck for giving injections. All 3 of our headgates can be attached to this chute. Chute ships economically by motor freight, and it is easy to break down and assemble. The inside chute dimensions are 30 inches wide and 78 inches long.
Both sides of the chute top and bottom doors open completely and independently of each other or they can be locked together. Working side door has a locking arm so you can pin the animal against the opposite side of the chute to limit their movement.MC78WeightPriceLess Headgate590 lbs.$1695W/HG30780 lbs.$2220W/HG28815 lbs.$2345W/SL28835 lbs.$2620Height: 78″ / Length: 84″ / Width: 34-37″
Like all of our chutes, this one is completely hot dipped galvanized, which means it is plated in zinc after fabrication, welds and all. This chute will last and look good for decades and will be the last chute you will ever need to buy. The heavy duty constructed frame is made out of 2 inch by 14 gauge square tubing. The side doors are made out of 1 ½ inch by 14 gauge square tubing. The side doors are sheeted 14 gauge and solid up 52 inches high. This cuts off animals’ side vision and also prevents wilder cattle from getting their legs outside of the chute. The chute floor is diamond tread plate with non slip cross bars every 12 inches to give cattle better footing.MC84WeightPriceLess Headgate965 lbs.$2850W/HG301155 lbs.$3375W/HG281190 lbs.$3500W/SL281210 lbs.$3775
Outside Height: 90″ / Outside Length: 92″ / Outside Width: 51″
- 1. The MC84 chute can ship economically by motor freight; it is easily broken down and reassembled.
- 2. Chute is only available in right hand side operation.
- 3. Chute can accommodate any of our 3 headgates.
- 4. Both sides of the chute are easily adjustable from 10 inches to 30 inches inside width. Because of our unique pivoting sway arms, the sides float.
- 5. Chute squeezes from both sides to keep the animal centered in the headgate. Sides release easily no matter how much pressure is on the sides due to our innovative spinlock latch system. Latch can be mounted in front or rear of the chute.
- 6. Side doors are all hinged for easy opening and closing. Doors have heavy ¾ inch spring loaded latch pins.
- 7. Left side of the chute opens completely for sorting or easy access to downed animals.
- 8. A convenient 6 inch opening is located in front of the upper side doors for easy access to an animal’s neck for giving injections.
- 9. Inside chute dimensions are 30 by 84 inches long.
This is our heaviest built chute. The floor has a 4 inch frame with 3/16 inch tread plate and non slip cross bars every 12 inches to give cattle better footing. The chute frame is made of 2 by 3 inch 11 gauge tubing. Doors are made of 2 by 11 gauge tubing with 14 gauge sheet. The sides are sheeted up solid 51 inches high; this cuts off the animal’s side vision and also prevents wilder cattle from getting their legs outside of the chute. Chute can accommodate any of our 3 headgates.MC90WeightPriceLess Headgate1375 lbs.$3850W/HG301565 lbs.$4375W/HG281600 lbs.$4500W/SL281620 lbs.$4775
Outside Height: 89″ / Outside Length: 102″ / Outside Width: 67″ / Inside Floor Length: 90″
- 1. Chute is completely reversible for left or right hand operation.
- 2. Chute is completely hot dipped galvanized, which means it is plated in zinc after fabrication, welds and all.
- 3. Chute squeezes from both sides to keep animal centered in headgate. Sides release easily no matter how much pressure is on the sides due to our innovative spinlock latch system.
- 4. Rear of chute has multiple adjustments for changing the alley way widths.
- 5. Chute has a heavy duty rear roller door that is completely solid, which helps keep the animals legs inside the chute.
- 6. Chute comes with a rump bar and the sides of the chute have 5 set catches to keep animals from backing up.
- 7. Sides of chute are easily adjusted because of our unique pivoting sway arms that do all the work. Each side has 4 settings.
- 8. Both sides of the chute have easily opened horizontally hinged upper and lower double doors plus a neck access door.
The MF1 and MF2 is a one-piece molded poly feeder with a round 36-inch steel base. It turns with the wind to keep the mineral dry. The MF1 holds about 50 lbs and the MF2 holds about 20 lbs mineral. The feeder edge on MF1 is 15 inches, and MF2 is 13 inches off the ground.
Ships via UPS.ProductHeightWeightPriceMF143″35 lbs$190.00MF231″25 lbs$145.00
GOAT MILK STAND
OPEN BAR DOOR
This unit is useful in making an access into holding pens and corrals. The frame is constructed of 2 inch by 14 gauge square tubing. The door is made of 1 ½ inch by 14 gauge square tubing. Door has a heavy ¾ inch spring loaded latch pin. The door swings both ways.Frame Height: 84″ / Door Height: 66″ / Inside Door Width: 39″ / Weight: 105 lb (47.7 kg)
OP41-04, 05, 06, 08
4', 5', 6', & 8' OPEN BAR PANEL
Our open bar panels are available in 4, 5, 6, and 8 feet long. Panels have 7 horizontal bars and are 41 inches high. These panels are ideal for making holding pens of different sizes in your barn or for holding areas in your handling system.ProductSizeWeightPriceOP41-044′28 lbs$85.00OP41-055′34 lbs$100.00OP41-066′40 lbs$115.00OP41-088′58 lbs$155.00Height: 41″
OP49-04, 05, 06, 08
4', 5', 6', & 8' OPEN BAR PANEL (TALL)
Our open panels are also available in a tall version of 49 inches. These panels are also available in 4, 5, 6, and 8 feet long, and they have 8 horizontal bars. Good for the jumpers and larger breeds.ProductSizeWeightPriceOP49-044′33 lbs$95.00OP49-055′39 lbs$110.00OP49-066′46 lbs$125.00OP49-088′66 lbs$175.00Height: 49″
10' OPEN BAR PANEL
OUTSIDE CREEP FEEDER
Rain has a hard time getting into this feeder. The grain trough is 36 inches back from the entrance and has only a 36-inch high overhang. This portable creep feeder on skids is easily moved by pulling it with a small tractor or four wheeler. Filling this 300-pound capacity feeder is easy with a hinged roof. Unit’s entrance has adjustable vertical and horizontal rollers that can be removed or added.
Ships via UPS.Length: 52″ / Width: 38″ / Height: 36.5″ / Weight: 150 lb (68.2 kg)
P1, P2, P3, P4
These feeders come in 1, 2, 3, and 4 feet long and have swing-out hooks to hang on a fence or rail up to 1 ½-inch wide. These feeders are easy to clean and very light but strong, ideal for shows and sales.
Ships via UPS.ProductLengthWeightPriceP11′3 lbs$26.00P22′4.5 lbs$36.00P33′6 lbs$46.00P44′8 lbs$62.00
Our pal cage connects behind any of our 3 chutes. Both side doors swing both ways and lock over to block off alley way, giving you access to the rear of your animal in the chute. It is constructed of 1 ½ and 1 ¼ inch by 14 gauge square tubing. Doors have a heavy ¾ inch spring loaded latch pin.Height: 78″ / Weight: 190 lb (86.4 kg)
R20, S38, S44, R36
ROPE TIE BAR, TEE ROD, & LINKING RODS
RACE ANGLE SUPPORT SET
Our NEW RM6000 comes completely galvanized so it won’t rust. Has solid tread plate floor with solid sides, so animals enter more easily with less distraction toward our V-type manual head gate. TM6000 is good for horned or polled sheep and goats. The backside has a 12-inch strip of carpet with the help of a back support and head gate to keep animal in position. Unit can be connected to the end of your raceway. (note: Does not include butt gate – RSG24)Weight: 295 lb (134.1 kg)
ROLL O'MATIC WITH SCALE ATTACHMENT
Unit comes completely installed with 4 beam load cells, weigh indicator and indicator holder. Save time and money getting your animals weight fast and accurate while working them in your Roll table without the need of a separate scale.
Our RM6000S comes completely galvanized so it won’t rust. Has solid tread plate floor with solid sides, so animals enter more easily with less distractions toward our V-type manual headgate. RM6000 is good for horned or pulled sheep and goats. The backside has a 12 inch strip of carpet with the help of a back support and headgate to keep animal in position. Unit can be connected to the end of your raceway. (note: Does not include butt gate – RSG24)Weight: 315 lb (143.2 kg)
MULTI-ANGLE RACEWAY SUPPORT
(NOTE: Some door latches have changed)