D-S Livestock Sheep Goat Cattle Handling Equipment

Products

D-S Livestock Sheep Goat Cattle Handling Equipment
(NOTE: Some door latches have changed)
  • RS1630

    ALLEY SUPPORT

    Our alley support is adjustable to set your panels from 16 to 30 inches apart. It can be used at every junction in the alley way if no alley gate is needed.

    Unit Height: 78″ / Unit Width: 38″ / Weight: 85 lb (38.6 kg)

    $195.00

  • RSG24

    ROLLIN' STOP GATE

    The RSG24 is used to stop the flow of sheep and goats in a raceway. The RSG24 also supports your raceway panels at the proper angle and width. Commonly used on both sides of a turntable and before your head gate. Our unique Rollin’ Stop Gate rides on rubber wheels to make operating it very easy and smooth.

    Height: 51″ / Width: 42″ / Weight: 42 lb (19.1 kg)

    $185.00

  • S1100

    FOLD-UP TRIMMING STAND

    This fold-up trimming stand can take a lot of abuse on the show circuit. The stand folds up for easy handling and storage. It comes with the HP1 headrest, which is adjustable to different heights for animals of different sizes. The trimming stand’s double-angle frame makes it strong but lightweight.

    Ships via UPS.

    Product
    Weight
    Price
    S1100
    53 lbs
    $200.00
    Height: 19″ / Width: 22″ / Length: 51″ / Weight: 53 lb (24.1 kg)

    $200.00

  • S1102

    CLUTCH WINCH STAND

    The S1102 has an 800-lb brake winch, which is very safe to use. Stand raises from 4 inches off the ground to 19 inches. Headrest is fully adjustable with deck up or fully down. Side rails can be used with this stand (R02). The headrest is set 3 inches ahead of deck to give stand a 53-inch top. Our stand has a single wheel to maneuver like a wheelbarrow, which works better in tight places.

    Ships via UPS.

    Product
    Weight
    Price
    S1102
    90 lbs
    $425.00
    Optional Side Rails
    $40.00
    Optional Scale Attachment
    $125.00
    Table height: 19″ / Width: 24″ / Length down: 76″
  • S1103

    CLUTCH WINCH STAND

    The S1103 is the same as S1102, just includes HR30 High Rise Kit, which has extensions for base and extra set of 30-inch-high legs. (Also includes 19-inch legs.)

    Ships via UPS.

    Product
    Weight
    Price
    S1103
    96 lbs
    $490.00
    Optional Side Rails
    $40.00
    Table height: 30″ / Width: 24″ / Length down: 87″
  • SC2-3

    PAIR OF AUTOMATIC CLOSING DOORS

    The SC2-3 pair of automatic closing door panels gives you easy access to the animal’s head. These panels allow you to add a sorter to the end of your RM6000 or just extend your raceway. The far-side door panel opens partially as the animal is rolled over to allow for the animal’s head and returns to closed position when the table is rolled back. Doors can also be locked in the open position.

    Add a sorter to the end of your RM6000
    (BS800 works best because of 30″ arm)

    Product
    Description
    Price
    Weight
    (1)BS800
    Bi Sorter
    $325.00
    75 lbs
    (1)SC2-3
    Pair of Doors
    $310.00
    82 lbs
    (2)S38
    Linking Rod
    $13.00
    6 lbs
    TOTAL
    $648.00
    163 lbs
    Weight: 82 lb (37.3 kg)

    $285.00

  • SD48-L or R

    4' SOLID DOOR

    Doors are sold in left and right side. Doors swing both ways. Used in alley ways so animals can be sorted out before chute. They also gives you access in alley way if needed. The frame is constructed of 2 inch by 14 gauge square tubing. Doors are made of 1 ½ by 14 gauge tubing. Door has a heavy ¾ inch spring loaded latch pin. Doors sheeted up solid 57 inches.

    Frame Height: 84″ / Door Height: 66″ / Inside Door Width: 39″ / Weight: 118 lb (53.6 kg)

    $330.00

  • SD550

    550-POUND STANDARD DIAL

    This dial is foreign made and is used on our SSD51 scale, as well as our S1102 winch stand scale attachment. The SD550 is a 6-inch dial with a capacity of 550 lbs and weighs in 2-lb increments.

    Ships via UPS.

    Weight: 3.5 lb (1.6 kg)

    $99.00

  • SF125

    125-POUND SELF FEEDER

    This two-sided self feeder holds 125 pounds of feed. Feeder is free standing and has 4 adjustable legs. Feeder has a lid and easy carry handles. Feeder feeds from 20 to 35 lambs or kids. Now made heavier.
    Ships via UPS.

    Height: 21″ – 23″ / Width: 20″ / Depth: 18″ / Weight: 70 lb (31.8 kg)

    $220.00

  • SF50

    50-POUND SELF FEEDER

    This one-sided, 50-pound self feeder has a lid and can be hung on a fence or rail up to 1 ½ inches wide. Feeds from 8 to 15 lambs or kids.
    Ships via UPS. Now made heavier.

    Height: 20″ / Width: 16″ / Depth: 9″ / Weight: 35 lb (15.9 kg)

    $110.00

  • SG1435

    3' SOLID WALK-THRU DOOR

    This door is the same as our G1435 except the lower part of the door is solid. Can be used in the handling system as a means to sort or access the other side of raceway. This door can be handy in creep areas as the mother can’t see through to try to get to the feed.
    Can be shipped via UPS.

    Height: 41″ / Weight: 45 lb (20.5 kg)

    $135.00

  • SG1475

    3.5' SOLID DOUBLE DOOR

    This double access door is designed to be used with the HG2 automatic head gate. Can be used on one or both sides of the head gate. The two doors are hinged inside of a heavy U frame. To open, just lift the door; doors open separately.

    Height: 41″ / Weight: 50 lb (22.7 kg)

    $175.00

  • SGP41-08

    8' SOLID PANEL WITH 3' DOOR

    This panel has a SG1435 3-foot door incorporated into an 8-foot solid panel for times when you need access in an 8-foot section. This panel is solid metal up to 30 inches off the ground. Good for reducing wind draft in your barn or if you need a side door in your raceway or crowding area. Door is hinged inside a heavy U frame and has a spring-loaded latch.

    Height: 41″ / Weight: 85 lb (38.6 kg)

    $235.00

  • Shearers Workstation

    Pen size: 6 ft (72 inches) square by 42 inches high

    As shown in picture (can be purchased in parts):

    Prod.
    Desc.
    Total
    Weight
    SH01
    Front Panel with Auto-Closing Door
    $275.00
    64 lbs
    SH02
    Stacker Panel for Hanging Shaft Machine Motor
    $70.00
    21 lbs
    SH03
    (2)Side Panels – 6′
    $250.00
    94 lbs
    SH04
    Back Access Panel with 3′ Door
    $165.00
    57 lbs
    SH05
    (2)3′ by 6′ Floor Sections
    $400.00
    142 lbs
    S38
    (4)Linking Rods
    $26.00
    12 lbs
    TOTAL
    $1,186.00
    390 lbs
  • SL28

    SPINLOCK SELF CATCH HEADGATE

    This is the most advanced self catch headgate on the market today. Our spinlock technology makes this the best headgate you will ever use. It can also be operated manually or be controlled at the rear of the chute by a pulley and cable system. This headgate operates by the animal trying to pass through the opening in the headgate. The spinlock system then goes from lock up set positions to close and lock in a fraction of a second. Doesn’t matter if cattle are wild or tame, they’re caught! The headgate can be set to catch cows and calves in a matter of seconds. This is the fastest mechanical headgate you will ever use. The headgate has 8 set positions for different size cattle from 7 to 20 inches. The headgate minimum opening is 5 ½ inches and maximum to release cattle is 28 inches at mid section. The headgate locks from 5 ½ to 17 inches with 9 positive mechanical catches that hold. No more cattle escaping! The headgate also has a 7 foot chain for head restraint. The headgate can also be locked open to allow cattle to pass through a chute. The SL28 easily mounts to any of our 3 chutes or can be mounted to wood posts for those who want to make their own chute.

    Width: 54″ / Height: 76″ / Weight: 245 lb (111.4 kg)

    $925.00

  • SL8-34

    SCISSOR LIFT STAND

    This stand is adjustable from 8 inches off the ground to 34 inches high. Has a 5,000 lb lift jack. This stand is very stable at 34 inches high. Side rails can be used with this stand (R02). Headrest is fully adjustable when up or all the way down. Headrest is mounted 3 inches out to give stand a 55-inch top. This is a HEAVY-DUTY STAND!

    Ships via UPS.

    Product
    Weight
    Price
    SL8-34
    130 lbs
    $495.00
    Optional Side Rails
    $40.00
    Width: 24″ / Length: 67″
  • SP41-08

    8' SOLID PANEL

    The 8-foot solid panel is used to form blind raceways when using turntables, head gates, and sorting gates. The solid portion of the panel is 30 inches high, so the sheep and goats can’t climb out of the system. Solid panels are used wherever you need to funnel animals. When not being used in your system, they work well for divider pens in your barn.

    Height: 41″ / Weight: 62 lb (28.2 kg)

    $165.00

  • SP41-35

    3.5' SOLID PANEL

    A 3 ½-foot solid panel is used with automatic head gate HG2. It can be used opposite SG1475 in the system, when access is only needed from one side. It has the same construction as SP41-08.

    Height: 41″ / Weight: 34 lb (15.5 kg)

    $90.00

  • SP66-10

    10' SOLID ALLEY PANELS

    Panels are sold in left and right sides. Panels are constructed of 1 ½ inch 14 gauge square and round tubing. Panels are sheeted up solid 57 inches high. Panels’ end connectors have heavy 5/8 inch pins.

    Panel Height: 66″ / Weight: 180 lb (81.8 kg)

    $470.00

  • SR-4

    4 HEAD SHOW RAIL

    This show rail comes with 4 adjustable head holds. Head holds can be taken out or added and can be adjusted side to side or up and down. The floor can be adjusted to two different heights – 4 and 8 inches off the ground. Unit comes complete with floor, 4 head holds, and sign holder.

    Product
    Weight
    Price
    SR-4
    85 lbs
    $345.00
    Extra Head Hold and Adjuster
    $40.00
    Width: 51″ / Depth: 36″
  • SSD51 with DB01

    Weigh fast and accurate with our NEW digital weighing system. The SSD51 scale with one beam load cell and indicator. (includes weighing crate)

    Weight: 195 lb (88.6 kg)

    $1,390.00

  • SSD51 with SD550

    EASY WEIGH SHEEP & GOAT SCALE

    This scale is truly portable with flip-up handles on one end and 10 solid wheels on the other end. Scale comes complete with guillotine tracks, ropes and pulleys, and quick engage and disengage weigh lever. Scale outer frame has panel connectors to hook right into your raceway. Inside crate has open bars to keep weight down and allow you to more easily inspect your animals. Note: door tracks can be easily removed. Can be hooked to the 3 weigh indicators listed below.

    SSD51
    Weight
    Price
    W/SD550
    200 lbs
    $995.00
    W/D400
    205 lbs
    $1471.00
    Inside crate dimensions: 18″ x 50″ x 37″ / Outside crate dimensions: 24″-30″ x 60″ x 82″
  • SW800

    8' SWING SLIDE GATE

    The swing slide gate is used in conjunction with CP41-08 8-foot curved tub panels to form a half circle, a “crowding pen,” not a forcing pen. When the animals are forced, they tend to go the opposite way. S44 linking rods are pushed slightly into the ground to maintain the circular shape of the system. A swing slide gate keeps the animals bunched at the entrance of the raceway and maintains the steady flow of animals into the system. The gate not only swings like a hinged door, but slides back through itself. When the gate is hinged up against the animals, another bunch can be brought in from behind. The gate can be pulled out from between the two groups so they merge into one. Using this method, the flow of animals isn’t interrupted. The crowding pen is formed into a U shape because sheep and goats flow better around a corner. Animals enter the crowding pen from behind the work station so if the shepherd is working by himself, everything is closer at hand. The gate slides on a nylon roller and pivots on ½-inch pins. Swing slide gate can be changed to circle left or right to suit individual needs.

    Height: 48″ / Length: 8′ (96″) / Weight: 117 lb (53.2 kg)

    $360.00

  • SYSTEM A

    1- TS900 Sorter with Stop
    1- RS1000 Raceway Support
    1- DP1 Drop Gate
    1- AB1 Anti Back Up Arm
    4- SP41-08 8-ft Solid Panel
    2- FD41-08 8-ft Sold Fold-Down Panel
    8- S38 Linking Rods

    Weight: 0 lb (0 kg)

    $1,621.00